Posts about: "G-N81AC" [Posts: 1 Pages: 1]

M2dude
4th Sep 2010, 10:49
permalink
Post: 212
BRIT312
Quote:
Now the F/E had a couple of calls to make prior to V1 relating to how good the engines were performing the most important being at 100 kts, however before we got that far the Braniff F/E stood up in his harness and let out the cry " Gee Whiz look at the son of a bitch go".
This story is totally hilarious, can't quite get this visual out of my head. ('100 KTS, POWER SET' sounds so boring in comparison). I never had the good fortune to meet any of the Braniff guys; sounds like there was certainly a character or two there. It really is a pity that their operation never really got a chance to expand into the proposed Pacific Rim service, who knows, it might really have done something.
It's generally known that the BA aircraft were temporarily re-registered to facilitate Braniff's operation out of IAD to DFW; G-BOAA, B, D & E were re-registered from G-BOAA and so on, to G-N94AA etc. Being an older registration, G-BOAC was re-registered as G-N81AC. At IAD, the 'G' part of the registration was covered over, leaving a now perfect 'American' tail number. Only five aircraft were involved in the operation (at the time BA operated just six aircraft, G-BOAF was still at the manufacturers at Filton, and G-BFKW (later to become G-BOAG) was on loan from British Aerospace. In order for the necessary FAA certification, required for operation by a US airline, a modification package were required by the FAA. Some of these modifications seemed a little 'picky' and irrelevant at the time (they still do). However some modifications were certainly not in this category, and quite honestly should have been 'picked up' by the CAA & DGAC during original certification of the aircraft. As an example, if the flying controls had been operating on GREEN or BLUE hydraulics only (due to an indicated spool valve jam) and that particular hydraulic system was subsequently lost, there was originally no automatic switching to select the standby YELLOW system into the flying controls; the controls would have been completely unpowered until a manual selection was made by the pilot. . One of the 'FAA Mods' was to facilitate just that, so if this (extremely unlikely I grant you) scenario had occurred, then YELLOW would automatically been selected into the controls, and at no time would the controls have been in an unpowered state.
The Braniff operation ended in May 1980, due to heavy losses on the subsonic only route, and it's a rather sad irony that aircraft G-BOAF had been modified and reregistered at Filton, from it's original registration of G-BFKX to G-N94AF. Unfortunately the aircraft was delivered to BA in June 1980, one month too late to participate, and prior to delivery it's registration was converted to it's 'normal' British registration; all other aircraft also reverted to original registrations also.
ChristiaanJ
Quote:
Reading your description of the autoland, you must be quoting from documentation, no?
Not really, being the sad b****d that I am, I still remember the Concorde flare law of: h+5h. = 0, so it was fairly easy to work out the programmed descent rates. (I did have to check the final 1.7'/second figure though). The rest I'm afraid is straight out of this sad old memory of mine.
Bellerophon
A brilliant description of the mechanics of final approach. It's so easy for us mere mortals to forget just what an involved and skilled process it was, to fly, and in particular land our totally amazing aircraft.

Dude

Last edited by M2dude; 4th Sep 2010 at 13:12 .